A furnace that cycles on and off without warming the house, a boiler that gurgles and leaves the upstairs cold, or a heating bill that keeps climbing with no change in how you use the home each calls for a different response. Burbank homeowners can call TR Miller Heating, Cooling, Plumbing & Electrical to discuss furnace repair, replacement, maintenance, boilers, and heat pumps with a team that also handles plumbing, drains, cooling, and electrical work. We have served Chicago-area homeowners since 2008, and we provide pricing before approved work begins. Our Bolingbrook and Tinley Park locations both serve the Burbank area.
Whether you live in a single-family home, a two-flat, or a condo, we start by looking at the heating system you have today. We explain what we find, walk through the options, and let you decide. If you are planning a replacement rather than dealing with a breakdown, contact us early so we can talk through the scope and any permit requirements before work starts.
Ask about current promotions when scheduling. We will confirm which offers apply to your service and address. Return to our Burbank home services page to see everything we offer in the community.
We offer the following heating services – and more – to the Burbank, IL area:
- Heater Repair
- Heater Installation
- Furnace Repair
- Furnace Installation
- Radiant Heating
- Boiler Services
- Ductless Mini Split AC Systems
- New HVAC Construction
- Thermostats
- Heat Pumps

We’ve proudly served our customers for three generations! Find out why our clients prefer us over other heating and cooling companies in our testimonials.
Furnace Repair in Burbank
When a furnace short-cycles, runs without warming the home, blows cool air, or starts making a new sound, a diagnosis can separate an equipment problem from an airflow or thermostat issue. Before you call, check that the thermostat is set to heat, that the furnace switch and breaker are on, and that the filter is clean. If the problem continues, a technician can find the cause and explain what a repair would involve before work begins. See our furnace repair page for more.
If you smell gas, leave the home right away. From a safe distance, call your gas utility and 911. Do not use light switches, phones, or anything that could spark inside the home. If a carbon monoxide detector sounds, get everyone outside and call 911.
Furnace Installation and Replacement
When a furnace has become expensive to repair, or a repair keeps returning, it helps to compare the options in writing. A technician can assess the equipment, its repair history, your home’s heating needs, and any related ductwork or electrical changes. Age alone does not decide the answer. We will explain what a repair would address and what a replacement project would involve, and give you a price before approved work begins.
Our furnace installation and replacement service includes sizing the new system to the home, because a unit that is too large or too small can cost you comfort and efficiency. We can also help you compare gas and electric furnaces for your home.
Heating Maintenance and Furnace Tune-Ups
A fall tune-up gives a technician the chance to check the filter, thermostat, burners and ignition, heat exchanger, blower, venting, airflow, and safety controls, including a carbon monoxide check, before the first cold stretch. It is a practical way to catch worn parts while the schedule is open. Ask us about current seasonal maintenance offers when you schedule, and see the TruCare section below for our membership plans.
Boilers and Radiant Heating
Not every Burbank home heats with a furnace. Some homes have boiler or radiant systems, and those call for a different diagnosis than forced air. A boiler that is noisy, leaking, slow to heat, or leaving some rooms cold should be looked at by a technician. We service boilers and radiant heating and can walk through repair and replacement options for what your home has today. The City lists installing or replacing boilers among the work that needs a permit, so we will go over the process with you before a replacement.
Heat Pumps and Ductless Mini Splits
A heat pump heats and cools, and it can be an option for homes that want one system for both seasons, as a replacement for an older air conditioner, or alongside a gas furnace. A technician can explain whether a heat pump alone, or a heat pump paired with a furnace, fits your home. See our heat pump services page for how they work and what to expect.
Ductless mini splits suit additions, finished basements, and spaces the existing system does not reach well. Ask us about utility and manufacturer rebates when you schedule. Availability and amounts change, so confirm any rebate with your utility before you plan around it.
What Heating in Burbank Homes Tends To Need
Burbank filled in during the postwar decades, and the housing numbers show it. Regional housing data from CMAP puts the median year a home here was built at 1965, and roughly 81 percent of homes date from 1940 to 1989. That points to a few common needs, though every house is different.
A home from the 1950s or 1960s has usually had its original furnace replaced already, and some are on a second or third system. The decision in front of many homeowners here is whether a repair is worth making or whether the furnace is due for replacement. Age alone does not decide that, so we look at the repair history, the condition of the equipment, airflow, and what the home needs. Older homes may also have had additions, finished basements, or updated systems over the years, and a heating review can show what you have before a replacement or a remodel.
About 17 percent of Burbank’s housing units are in buildings with two or more units. If you live in a two-flat or condo, tell us your building type when you call. Equipment location, venting, and your association’s rules can affect how a heating project is done, so check with your association before you schedule work.
We look at what you have today, including its condition, airflow, and capacity, and recommend work based on what we find.
Permits for Heating Work in Burbank
Permits in Burbank go through the Building Department at City Hall, 6530 W. 79th Street. The department takes questions at (708) 599-5500, Option 2 or [email protected]. The City’s list of work that needs a permit includes installing, replacing, or extending warm air furnaces and installing or replacing boilers. Its heating, venting and air conditioning permit form says an inspection is required and that the installation instructions must be on site for the inspection. If a project is not on the City’s list, the department asks residents to call to check whether a permit is needed. We will review the process with you before a qualifying project moves ahead.
Why Burbank Homeowners Call TR Miller for Heating
When a problem affects more than one system, it helps to have one team to call. A furnace that will not start might be a heating issue, an electrical one, or both. TR Miller handles heating, cooling, plumbing, drains, and electrical work, and we provide a price before approved work begins. If you are unsure whether your address or equipment is covered, tell us when you call and we will confirm. You can also read what customers say in our reviews.
TruCare and TruCare+ Memberships for Burbank Heating
A furnace that has been checked before the first cold night is less likely to fail during the winter. Our TruCare and TruCare+ memberships include semi-annual spring cooling and fall heating tune-ups, priority service with a same-day guarantee when you book before noon, 10% off HVAC repairs, and 5% off select HVAC equipment installation. Active members also get a longer repair warranty. TruCare+ goes further with $0 diagnostic fees and added plumbing and electrical benefits. Ask us which plan fits your home.

A third-generation, family-owned company, we offer heating and cooling repair solutions. Contact us to schedule your next service with us!
Frequently Asked Questions
Q: Does TR Miller provide heating service in Burbank, IL?
A: Yes. TR Miller serves Burbank homeowners with furnace repair, installation, maintenance, boiler service, and heat pumps. Call with your address and the type of work needed so our team can confirm service availability.
Q: When should I schedule a furnace tune-up?
A: Fall, before heating season begins, is a good time. A tune-up lets a technician check the system and address worn parts while the schedule is open.
Q: How do I know if I need a furnace repair or a replacement?
A: A technician can assess the equipment, its repair history, and your home’s heating needs. Age alone does not decide the answer. We will explain the repair and replacement options that fit what we find, including related ductwork or electrical changes.
Q: Does TR Miller service all furnace brands?
A: We service many major equipment brands. Share the make and model when you book so our team can confirm availability.
Q: What should I do if my furnace stops working overnight?
A: Check that the thermostat is set to heat and that the furnace switch and breaker are on, then call TR Miller at (815) 912-0028. Keep interior doors closed to hold heat in occupied rooms. Never use a gas range, a portable propane heater, or a charcoal grill indoors for heat, because they are carbon monoxide hazards.
Q: What should I do if I suspect a gas leak or carbon monoxide?
A: Leave the home immediately. From a safe distance, call your gas utility and 911. Do not use light switches or anything that could spark inside the home, and do not re-enter until emergency personnel say it is safe. Contact TR Miller once the area is clear.
Q: Does TR Miller install heat pumps?
A: Yes. We install and service heat pumps and ductless mini splits. A technician can explain whether a heat pump alone, or a heat pump paired with a furnace, fits your home.
Q: Do I need a permit for heating work in Burbank?
A: The City’s list of work that needs a permit includes installing, replacing, or extending warm air furnaces and installing or replacing boilers, and its permit form says an inspection is required. Requirements vary by project. Confirm the scope with our team and the Building Department at (708) 599-5500, Option 2 before work begins.
Q: What do TruCare and TruCare+ include?
A: Both plans include semi-annual heating and cooling tune-ups, priority service with a same-day guarantee when you book before noon, 10% off HVAC repairs, 5% off select HVAC equipment installation, and a longer repair warranty while the membership is active. TruCare+ adds $0 diagnostic fees and added plumbing and electrical benefits. Ask us which plan fits your home.
